After the first autumn rains and once weeds from previos stubble had grown, we harrowed to prepare fields we are going to fertilize them on the next days. These fields are going to be sowed of cereal in November. We use mineral fertilizer, but we will talk about that in few next post.
About the done job with chissel, we would like to say it is fantastic to have the possibility of harrowing with two tractors. Our Deutz-Fahr Agrotron M600 uses Gil cultichissel of 19 rows (5m working width) and the John Deere 5720 uses Quílez chissel of 11 rows (3m working width). With this equipment, we can work comfortable and we can encompass very soil in a day with a working speed in the Agrotron M600 of 7.5km/h and 6.7km/h in the John Deere 5720
Once we will have fertilized these fields, we have to harrow with chissel again to bury fertilizer. In this time, we are going to harrow perpendicularly to the sowing direction, so we don't want to suffer deviations of the seed drill which could cause no straight rows. About stubbles of the last campaign, when we will have finished this last harrowing work, they will be absolutely ground and we will have a perfect seedbed.
About the done job with chissel, we would like to say it is fantastic to have the possibility of harrowing with two tractors. Our Deutz-Fahr Agrotron M600 uses Gil cultichissel of 19 rows (5m working width) and the John Deere 5720 uses Quílez chissel of 11 rows (3m working width). With this equipment, we can work comfortable and we can encompass very soil in a day with a working speed in the Agrotron M600 of 7.5km/h and 6.7km/h in the John Deere 5720
Once we will have fertilized these fields, we have to harrow with chissel again to bury fertilizer. In this time, we are going to harrow perpendicularly to the sowing direction, so we don't want to suffer deviations of the seed drill which could cause no straight rows. About stubbles of the last campaign, when we will have finished this last harrowing work, they will be absolutely ground and we will have a perfect seedbed.
Versión en español.
Muy buenas fotos y una parcela realmente también muy "guapa". Sólo una objección, el JD a todas luces parece que no va bien lastrado, e incluso creo que el deslizamiento sería más de un 20 % si estábais trabajando cerca de 7 km/h
ReplyDeleteHelio,
Deletehemos pesado los tractores y estos son los resultados que tenemos: el JD pesa 4220kg, por lo que tiene 51kg/cv. El DF pesa 7140kg, por lo que tiene 53kg/cv.
¿Crees que necesitan estar más lastrados?
Muchas gracias.
Tienes razón Helio. Utilizamos 6 contrapesos de 45kg cada uno en la parte delantera, pero con la pala hay que quitarselos y no nos dio tiempo a ponerlos.
ReplyDeleteCuando tiene los contrapesos puestos, hay un problema, que bota mucho de la parte delantera cuando va por carretera.
De todas formas, así es como John Deere te lo comercializa, los contrapesos los hemos añadido nosotros después de comprarlo.
¡¡ole ole ,que no paren esos tractores!!
ReplyDelete¡¡ni esos cultivadores!!
joder ,la primera vez que veo uno con marcadores, fino-fino¿eh?
por cierto soy la que te propuso la version en españññññol
gracias mil majetes
y como agradecimiento ahi va una jotilla
y ahi ya va la despedidaaaa
la que echan los labradoreeees
surco arriba surco abajoooo
y adios ramito de floreeeees
salú
Muchas gracias por esa jotica!!
DeleteTenemos que intentar solapar lo menos posible, y con un arado de 5 metros, es complicado si no tienes indicadores.